| Pròiseact | Susbaint | Comasach |
| 1 | seòrsachadh bùird | Bun-stèidh Alùmanum, Bunait Copair, bonn copair, Co-bhòrd Bade Co-cheangailte |
| 2 | stuth | Alùmanum dachaigheil.Copar dachaigheil, alùmanum air a thoirt a-steach, copar air a thoirt a-steach |
| 3 | làimhseachadh uachdar | HASL/ENIG/OSP/sikeering |
| 4 | cunntas còmhdach | bòrd pnnted aon-thaobhach / bòrd clò-bhuailte le dà thaobh |
| 5 | maxi.Board Meud | 1200mm*480m(n |
| 6 | min.Meud a' Bhùird | 5mm*5mm |
| 7 | leud loidhne/apsce | 0.1mnV0.1mm |
| 8 | dlùth agus toinneamh | <=0.5% (tfiickness: 1 .Omm, Meud a 'Bhùird: 300mm * 300mm) |
| 9 | tiugh bòrd | 0.5mm-5.0mm |
| 10 | tiugh foil copair | 35urrV70um/105um/140um/175unV210um/245um/280um/315um/35Qjm |
| 11 | fulangas | Slighe CNC: ± 0.1 mm; punch: 士 0.1 mm |
| 12 | Clàradh V-CUT | ± 0.1mm |
| 13 | Tighead copar balla toll | 20um-35um |
| 14 | Clàradh mmm air suidheachadh tuill (campa le dàta CAD) | ± 3 mìle (10.076mm) |
| 15 | Min.punching toll | 1.0mm (tighead bùird bebw1.0mmr1.0mm) |
| 16 | Min.punching ceàrnagach sliotan | (Tighead bùird gu h-ìosal 1 .Omm, 1.0mm * 1 .Omm) |
| 17 | Clàradh cuairt clò-bhuailte | ± 0.076mm |
| 18 | Trast-thomhas toll Min.drill | 0.6mm |
| 19 | tiugh làimhseachadh uachdar | òr plating: Ni 4um-6um> Au0.1um-0.5umENIG: Ni 5um-6um,Au: 0.0254um-0.127umairgead: Ag3um-8umHASL: 40um-1 OOum |
| 20 | V-CUTdegree fulangas | (Ceum) |
| 21 | Tighead bòrd V-CUT | 0.6mm-4.0mm |
| 22 | Min.legend leud | 0.15mm |
| 23 | Min.Soldor mask fosgladh | 0.35mm |